Tips to Care your Computer

Here are some tips to maintain your computer

 1. Never turn off the computer by pressing the power button until Windows has really turned off and hard drive is not running (hard drive light is not blinking). Turning off the computer by using the power button without waiting for the OS to stop will cause data loss, do it only when forced.

  2. Buy a UPS (uninteruptable power supply). UPS prevents your computer from damage due to high voltage occurrences. At the time of power failure means that the computer is turned off according to the procedure and consequently did not exist at one point.

   3. Backup regularly. Make backups of important data to external storage such as floppy disks , Zip Drive, CD-RW, DVD-RW and others.

   4. Run Scandisk and Defragment every once in a month. This will keep your hard drive to remain healthy and prevent damage.

   5. Never remove peripherals from the computer if the computer in a state of burning. This will damage the socket or the motherboard. Exceptions for peripherals that "hot pluggable" USB drives for example.

   6. Provide a minimum of 100 MB of your C: drive free system (Windows). If you use Windows Me or Windows XP will provide 200 MB. If not enough space for Windows, the work area will force windows to do the dumping data to your hard drive and will cause the computer worked very slow.

   7. Do not have too many programs running at the time the computer started to work. This program can be seen in the right bottom status bar  layer and the programs use memory and Windows Resources (Windows internal Workspace). Run only program that we will used

   8. Perform a virus scan regularly
   9. Use a firewall if you connect to the internet. Firewalls prevent your computer from unwanted access.

  10. Save with a good cd that you have when buying computer and peripheral. These disks contain the appropriate drivers and programs to your computer when you need to reinstall. Store in a safe and dry place.


Thanks for your visit on kumpulan tips komputer

Read More

Tutorial to Changing the Display of Windows XP

Now, there are so many software that can change the look of Windows XP to be like the new Operating System. But sometimes the software installation is risky, because sometimes cause a problem whether it be when we update windows, after being uninstalled or conflicts with other applications.

The most secure and easy is the default Windows XP Visual Styles.

The diffferences of Themes and Visual Styles

Sometimes there are errors of understanding between the Themes and Visual Styles. These visual styles are files with extensions .Msstyles, which contains information on how the windows will be displayed, such as the toolbar skin, start button, border, button and others.

While the themes are the files. Themes that contain additional information such as icons, wallpapers, cursors and other. Within these themes the file can also contain information used by the visual styles.

An example could see the files in the directory C: \ WINDOWS \ Resources! Themes. Theme can be opened with Notepad or WordPad, and we can directly edit the contents.

Change Settings Visual Styles:

we can open Visual Styles  windows through: Right-click Desktop -> Properties -> Appearance. And Windows XP only provides three default visual styles, namely: Default (blue), Olive Green and Silver.

This arrangement permits the visual display real essence lies in Uxtheme.dll files, which are located in C: \ WINDOWS \ system32. So that we can use the visual styles from the outside (third party), the file must be slightly modified Uxtheme.dll (patch). To do that, we can use UXTheme Multi-Patcher or UxStyle.

UXTheme Multi-Patcher

This program size just about 1.1 MB and after we install it, it will change the file Uxtheme.dll, so we can activate and use of third-party visual styles.

After downloading UXTheme Multi-Patcher, open and execute files UXTheme Multi-Patcher 6.0.exe. This first installation will be performed like this:


Click on the Patch, and then will appear the windows version information. If it is matching click OK. And it will continue  the process of patching windows files, like this:


Next will come the Windows File Protection, and click cancel.

Once completed, it is need to restart. Then we can use a variety of visual styles from a third party. To restore Uxtheme.dll to the previous condition, then restart the program UXTheme Multi-Patcher 6.0.exe.

Download UXtheme Multi Pathcer 6.0 here:
- http://www.softpedia.com/progDownload/UXTheme-MultiPatcher-Download-2369.html
- http://www.windowsxlive.net/download/uxpatcher.zip

Using UxStyle
Unlike Multi-Patcher UXTheme that directly alter Uxtheme.dll windows files, with this UxStyle will be safer, because it will not change the file Uxtheme.dll. After UxStyle installed, there will be UnsignedThemeSvc.exe applications that are running in the background, using about 2-3 MB of memory.

We can then vary the visual styles from a third party. When this article was written UxStyle still beta and can run on Windows XP, Vista and Windows 7.

Download UxStyle: http://uxstyle.com

Download  Windows Visual Styles

One way to try if success is to download visual styles and run it directly. Here are some interesting examples of Visual Style.
Windows Seven M1 VS 2.0

Sentinel Beta – 1

Aquanox VS (Jalankan file exe didalamnya dan aktifkan melalui Display Properties)

Royale Vista VS

Royal Inspirat special Edition

Luna Inspirat


Xbox XtremeXP

Crystalline


To download the others, please look deviantart, ThemeXP, joejoe.org forumneowin forum forum.

Once downloaded, extract (open) an existing file in the zip / rar and then search for and directly execute the file with  .Theme or search for files with extensions .Msstyles and double click, it will immediately show a screenshot of the Display Properties with it new appearance and some settings other.

If you want all the visual styles appear in the Windows menu and buttons above, place the file and folder inside the folder C: \ WINDOWS \ Resources! Themes, with the rule as follows: 
* Files. Themes should be placed in the directory / Themes folder (C: \ WINDOWS \ Resources \ Themes),* File. Msstyles must put in a sub directory. For example a visual style is VistaGlass, then the location of the file. Msstyles filetakkan in the directory C: \ WINDOWS \ Resources \ Themes \ VistaGlass• If included files shellstyle.dll, then placed in a subfolder c: \ WINDOWS \ Resources \ Themes \ Name_themes \ shell* Name of file and the folder is case sensitive (distinguish lowercase and magnitude).

But the easiest way is to search the files .Msstyles and double-click directly


Referensi
- http://lifehacker.com/5056544/how-to-use-custom-windows-visual-styles
- http://lifehacker.com/5299484/uxstyle-allows-custom-windows-themes-without-patching

Thank for Visit Kumpulan Tips Komputer

Read More

Tutorial to Accelerate speed of Windows Shutdown

Shutdown process can sometimes take a while, especially when you're done using various applications, there is an application that hangs, and others. This is often annoying, How to make Shutdown process faster?
There are several techniques that can be used to accelerate the process of Shutdown windows, ranging from common technique to abnormal technique. So we can shutdown windows less than 5 seconds or even only about two seconds, without requiring additional software.

Common Technique
common technique is to modify the Windows Registry, which is all things relating to the process of Shutdown windows.  Before modifying the Windows registry It's recommended, to backup it (by choosing File menu> Export when it was signed in the Windows Registry Editor). Here's how and explanation:
Previously, first open the Windows Registry Editor (Menu All Programs> Run) type regedit and then Enter or click OK.

After the Windows Registry Editor is open, u can be follow this step:

* Automatic shut (Auto Kill) all applications on Shutdown Find the following key: HKEY_CURRENT_USER \ Control Panel \ Desktop, then find a Key AutoEndTasks right click, select Modify and if its value is not the one then replace it with the value 1.

* Changing Application Hang time. still in the same Key (HKEY_CURRENT_USER \ Control Panel \ Desktop), find the Key WaitToKillApp, HungAppTime, and WaitToKillServiceTimeout. Right-click each key and select Modify, replace the contents with the value in 1000.

* Disable Paging File Clearing facilities 
At the time of shutdown, windows auto-delete the contents of paging files for security, because of the possibility of the paging file is used for temporary files, containing user or password and so forth. If we are not too concerned with security issues, the windows of this facility can disable to speed up the shutdown process. Do I look for the following key in the Registry Editor: HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Memory Management, then search ClearPageFileOnShutdown key and right click, select Modify, replace the contents with the value 0.

By changing a few settings, the shutdown process should be  more quickly than usual, especially if there are applications that often hangs when shutdown. If you do not want to bother with the steps above, just copy and paste the following text, then save the file name extension  .reg (for example: fastshutdown.reg). After that, run the file (double click), when confirmation appeared, click Yes.

Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Control Panel\Desktop]
"WaitToKillServiceTimeout"="1000"
"AutoEndTasks"="1"
"HungAppTimeout"="1000"
"WaitToKillAppTimeout"="1000"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"ClearPageFileAtShutdown"=dword:00000000

save it with notepad, select Save as and then the Save as type select All files, when saving give quotes, eg "fastshutdown.reg"

Thanks For Visit on kumpulan tips komputer

Read More

Computer Tutorials-How to Keep Caring Flashdisk Durability

No doubt that  flashdisk is currently the most commonly used medium storing data easy to carry everywhere. But just little that give attention to the problem during using it . Perhaps because of its capacity that has reached Giga Byte, so that all data is entered, and every moment is installed in a computer is like a mini hard drive. In fact there are not only hundreds of content data, even thousands of data on it.

Few people know that the flash has a life, like fluorescent lamps which have a life (eg hold until 5000 hours). Nor flash. But what age the size of the flash? How to use flash to make it more durable? what important things to note about the flash?


Some of the things that became characteristic Flashdisk
Some things tahat we must know about the flash (pure USB Flash disk, not MP3/MP4):

    * USB Flash Disk can only be activated if there is electrical current that can be obtained via the USB port.
    * Some Flash Disk or currents require greater power than others, so sometimes it must be plugged directly on the motherboard port (without cable connection and not a port on the front) to be detected.
    * Flash Disk can not be read if the cable used was too long, because the current is usually less powerful.
    * Flash Disk has age / lifetime, for example 100 000 read / write or resistance to 10 years.
    * Read access speed is faster than write in flash. For example read 16 MB / s while the write 4 MB / s (one and others vary)
    * File system is commonly used FAT or FAT32, because it can be accessed almost anywhere that supports the USB port. Though can be formatted in accordance with the type of operating system, like NTFS.
    * Defragment files on flash is not needed and did not influence the speed of access, because flash is using a type of Random Access Memory.

How to secure the data on it?

The only way it seems to encrypt the data in flash disks. Although nowadays when buying a flash disk is included software that can lock it. USB Flash disk is not damaged although the possibility of wet or even soaked, but first blow-dry it before being used .

Here are some Tips Using flashdisk to make it more durable
 
* Do not save files that are very much into the pendrive, if possible better in the zip. As more and more to save the file so the process of writing the flash will also be more, so it age is also rapidly decreasing.
* If it is not so important, avoid editing directly from the flash. Alternatively copy the data on your computer, then edited and returned after the copy to flash.
* If not being used, remove the stick from the computer.
* Try to always remove the stick from the computer through the "Safety Remove Hardware" and avoid the direct release when  in the process of reading / writing, because it could have been damaged by an electrical current.

With one another flash of age and have different speeds. One more tips when buying flash, do not just look at the price, but also a guarantee, if a little more expensive but longer warranties, so choose a longer warranty. Hopefully useful


Thanks for your visit on Kumpulan Tutorial Komputer

Read More

Tutorials-How To Change Windows Taskbar Windows XP be like Windows 7

For those who use Windows XP and have never tried to display the Taskbar of Windows 7 (Superbar), now there is a small free program without having to install it (portable) to change the look of Windows XP Taskbar to become like the look of Windows 7 plus an interesting effect, ViGlance. This program is only the size of about 239 KB.

Not only view, but also tried to imitate ViGlance features in Windows 7.

ViGlance is a small program for free from the lee-soft which makes viewing the Taskbar of Windows XP be like Windows 7 (Windows 7 Superbar for XP). ViGlance features are:
 
* Process grouping, the same window will be used as a single group, with a view iconn only.
* Icon display will be 48 × 48 the previous (default) is 16 × 16, so it will be 3 times larger, without any text. Agaa perform such a large icon (48 × 48), taksbar size must be 2x resize it.
* Change XP Start button becomes a replica Orb (Windows 7), including the transition effects such as Windows 7.
* Information description name / title window with attractive transition effects (called "glide"). Text size will adjust to the long title of the window in question.

To be perfectly Superbar view, the taskbar should be on the lock (by way of Right Click the Taskbar and choose Lock the Taskbar until there is a tick in the menu).

How to Use ?

To activate this Superbar very easy, download ViGlance from http://lee-soft.com/viglance/ address, open and execute files ViGlance OneStep.exe. Windows XP Taskbar will automatically change. To return to the previous view simply right click the icon ViGlance (in systray / taskbar right corner) and select the Exit menu.

Screenshot Taskbar Windows XP with ViGlance





Taskbar Windows 7 RC 1




One thing (interesting features) that does not exist in ViGlance is the thumbnail, so when the mouse cursor is moved over the icon, only the visible text or text (title window) only. But it seems it also became a target for the next version (when I tried version 1 build 1077 ViGlance no thumbnails of each the program)

In order to view the size of 48 × 48 icon, then we need to Unlock the Taskbar and taksbar resize (resize it by dragging) so that its height becomes 2x.


 Download ViGlance (zip file 198 KB)

 Thanks For visiting kumpulan tutorial komputer :)

Read More

How to turn off windows autorun

So many viruses circulating in the world, most viruses attack through autorun so that the virus easily be automatically activated every time the user access to these drives, they will form the Autorun.inf file / desktop. This / Folder.http each drive that is met, including through the media disk or Flash disk

Actually there are several antivirus that can drive through access autorun virus attack, but it is not bad if I explain tips to manually turn off autorun :)

Here is step to disable autorun in windows:

click [Start]-[Run]
In the dialog box Type GPEDIT.MSC
Then appear Group Policy, next click Administrative Templates In the User Configuration menu
next click System
find Turn off Autoplay then right click choose Properties
In Tab setting Choose option Enable
On Turn off Autoplay menu select [All Drives]
Apply
Ok
Close

Thanks For Your visit on Kumpulan Tips Komputer

Read More

How to optimize your SEO Keyword

keywords is one of the factors that can attract the attention of search engines in indexing a website or blog ,even  when we determine the title of the article / posting there are any special tips needed to be easily recognized search engines. Basically we are free to display the title in accordance with our will, however, the problem whether the search engines can recognize our post title or not. Unfortunately if the article contains interesting things but the quiet readers?

Keywords must be popular in the sense that often sought after by surfers there internet.Here are simple tips for websites, blogs or the title of our blog search engine easily recognized, especially by google. This tip is also frequently used by online pembisnis in doing his research. The trick is as follows(see the picture below):

# Define keywords used to the idea that we want to display as the title of the article, say the word "tips" and the word "Tag"# Sign in to https: // adwords.google.com
#Select your language and country headed
#Enter keyword and click get keyword ideas
#Note the volume number of searches in the last month

Instead of using google adword, you can also determine the right keywords through www.digitalpoint.com site assistance, a simpler way than Google AdWords.

Thank's For your visit on Kumpulan Tips Komputer

Read More

Windows Tutorials-How To Put Wallpaper in Windows XP as they pleased

The following tutorial are perfect for those of you who liked to be creative with wallpaper windows:


We can Put Wallpaper Through WallpaperMover application, you can put wallpaper on the desktop as you want.

Windows XP only gives two options settings To adjust the display position on the desktop wallpaper, namely Tile and Center. What if you want to add the settings and put the wallpaper in accordance with the wishes?

Tips To add the setting up and putting the wallpaper image in accordance with the desire, you can use a simple application called WallpaperMover for Windows XP. This application you can download via http://windowsxp.mvps.org/wallpaperpos.htm

Use of this application quite easily. Once downloaded, extract the application and execute the execution file (WallpaperPos.exe). Next, select the radio button "Manual" and define the coordinates of the desired wallpaper placement by completing the "X Pos" and "Y Pos". To execute, you can press the button "Set Wallpaper Position".

Good Luck :)

Read More

Tutorials to Hide the Logon Name in Windows XP Owned

With a little manipulating data in the system registry, we can easily hide logon names that appear on the welcome screen of Windows XP.

To do this trick, first you have to access the registry editor by clicking "Start" button and select "Run" and type 'regedit'. Next, you will enter into the Registry Editor. Go to the HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ Userlist.

Now consider the right panel of the Registry Editor. There you can add a new DWORD in accordance with a user name account or logon name that will be hidden.

For example, we want to hide the logon name in the name Eko Lannueardy. Create a DWORD with the name Eko Lannueardy and confirm the data value is 0. To redisplay the hidden logon name, you can change the value data with the number 1.

Thanks For Your Visit  on kumpulan tutorial komputer

Read More